ASTM A333 Grade 6 Seamless and Welded Steel Pipe for Low-Temperature Service normalized Pipes.
ADITYA STEEL ENGG. CO. is Stockist of ASTM A333 GR 6 Carbon Steel Pipes in Dubai Midlle east, Suppliers of ASTM A333 GR 6 seamless pipes in Mumbai, exporters of A333 GR 6 Carbon Steel Seamless Pipes in uae, suppliers of A333 GR 6 Carbon welded pipe in korea, dealers of ASTM A333 GR 6 Carbon Steel Pipes, Stockist of A333 GR 6 High Pressure Seamless Pipe Supplier , Stockist of ASTM A333 Gr 6 Carbon Steel Pipes in India, Carbon Steel A333 Gr.6 Seamless Pipe in Europe, Stockist of A333 Gr.6 Carbon Steel Welded Pipes in Japan, uae, Stockist of A333 Gr 6 Pipe suppliers in India.
ASTM A333 Grade 6 Seamless Pipes.
Carbon Steel A333 Gr 6 Seamless Pipes is recognized for low temp appliance and can be used for aqueous media as well. It exhibits ferritic properties such as it has high tensile strength, corrosion resistant to the saline environment, resistant to oxidation, and pitting corrosion. Carbon Steel A333 Gr 6 Seamless Pipes have an exception to welding because it has excellent thermal stability, but after going to high temperature environment, the precipitation of intermetallic phases will degrade and effect to its durability and mechanical properties.
Manufacturres, Stockist & suppliers of of ASTM A333 Gr.6 Low Temperature Pipes in Europe, manufacturres of ASTM A333 LTCS Seamless Pipe in Japan, manufacturres of Grade 6 ASTM A333 Low Carbon Seamless Pipes in India, manufacturres of ASTM A333 Grade 6 Seamless Pipe in South Korea, manufacturres of Carbon Steel Seamless Pipes in Germany, manufacturres of Low Temperature Seamless Pipes Stockist in Dubai, dealers of CS Seamless Pipes Prices in Spain, dealers of ASTM A333 Grade 6 Low Temperature Seamless Pipe Exporter in Uae, dealers of A333 Gr 6 Carbon Steel Seamless Pipe in Qatar, dealers of Carbon Steel ASTM A333 Gr 6 Seamless Pipe Supplier in India.
Scope
ASTM A333 covers nominal (average) wall seamless and welded carbon and alloy steel pipe intended for use at low temperatures. Several grades of ferritic steel are included. Some product sizes may not be available under this specification because heavier wall thicknesses have an adverse affect on low-temperature impact properties.
Material & Manufacture
The pipe shall be made by the seamless or welding process with the addition of no filler metal in the welding operation.
Heat Treatment Requirements
All seamless and welded pipe shall be treated to control their microstructure by the following methods: Normalizing per A 333/A 333M-05 section 4.2.1.1; section 4.2.1.2 or section 4.2.1.3 Quenched and Tempered per A 333/A 333M – 05 section 4.2.2.1 Double Normalized and Tempered per A 333/A 333M – 05 section 4.2.2.2
Types of ASTM A333 Carbon Steel Grade 6 Low Temperature Pipe & Tubes
| Stockist of ASTM ASTM A 333 Tubing in India | Carbon Steel ASTM A 333 Grade 6 Low Temperature Pipe Suppliers |
| CS Grade 6 Low Temperature Pipe and Tubes Exporters | ASTM A 333 Grade 6 LSAW Pipes and Tubes Stockist |
| ASTM A 333 Low Temperature Tubes Distributors | ASTM A 333 Low Temperature Pipes Suppliers in Europe |
| Carbon Steel ASTM A333 Grade 6 Low Temperature Piping Exporter in Japan | ASTM A 333 Grade 6 Low Temperature Tubing Suppliers in Korea |
| Carbon Steel Seamless Pipes and Tubes Dealer in Dubai | ASTM A 333 Seamless Pipe Stockist in Middle east |
| Carbon Steel ASTM A333 Tube in South Korea | CS ASTM A333 Grade 6 Low Temperature Pipe Distributors in Mumbai |
| ASTM A333 GR 6 Low Temperature Piping Manufacturer in India | Top Quality ASTM A 333 Pipe and Tube |
| A 333 CS Grade 6 Low Temperature Tubing Exporter in Singapore | ASTM A 333 Grade 6 Seamless Pipe Stockist in India Germany |
| ASTM A 333 Low Temperature CS Grade 6 Low Temperature Tubes Thane | ASTM A 333 CS Grade 6 SAW Pipe & Tubes In Vasai |
| ASTM A 333 Grade 6 Low Temperature Pipes and Tubes | ASTM A 333 Carbon Steel Grade 6 Low Temperature Pipes Stockist in Saudi Arabia |
| ASTM A333 Grade 6 Low Temperature Pipes in Asia | Carbon Steel Grade 6 Low Temperature Tubes in Far East |
Carbon Steel A333 Gr 6 Seamless Pipes Specification
| CS Gr 6 Pipes Specifications | ASTM A333 / ASME SA333 |
|---|---|
| Dimensional specification | ANSI/ASME B36.19M, ANSI/ASME B36.10M |
| ASTM A333 6 Seamless Pipe Size | 1 / 2″ NB – 16″ NB |
| ASTM A333 6 EFW Pipe Size | 6″ NB – 24″ NB |
| Outside Diameter | 6.00 mm OD up to 914.4 mm OD, Sizes up to 24” NB available Ex-stock, OD Size Steel Tubes available Ex-stock |
| Carbon 6 Pipes Manufacturing Shapes | Round, Rectangle |
| Carbon Steel 6 Pipe Manufacturing Techniques | Seamless |
| Carbon Steel 6 Pipe Schedule Thickness Range | SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Carbon Gr 6 Pipes End Types | Plain End, Beveled End, Treaded One End, TBE (Treaded Both Ends) |
| Delivery Condition of Carbon Steel Gr 6 Pipe | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
| Value Added Services | Cutting, Beveling, Polishing, Threading, Destructive, Non Destructive, Ultrasonic Testing |
| Inspection and Test Reports | EN 10204 3.1, Mill Test Certificates, Chemical Reports, PMI Test Reports, Mechanical Reports, Third Party Inspection, NABL Approved Lab, Visual Inspection, Destructive Test and Non Destructive Test Reports |
| Marking | Specification Grade Nominal Pipe Sizes Pipe Schedule or Wall Thickness Manufacturing Method (Seamless) Heat Number Manufacturer’s Name or Custom Logo – on request Marked Pipe Sample: ANSI B36.19 ASTM A 333 6 12″ NB SCH 40S SEAMLESS HEAT NO. XXXX |
| Outside Finish | 2B, No.4, No.1, No.8 Mirror Finish for Carbon Steel Pipes, Finish as per customer Requirements |
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Packing of Carbon Gr 6 Pipes | Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests |
| Specials | Sizes and Specifications other than above can be on request |
Chemical Requirements
| Composition, % | |||
| Element | Grade 1 | Grade 3 | Grade 6 |
| Carbon, max | 0.30 | 0.19 | 0.30 |
| Manganese | 0.40 – 1.06 | 0.31 – 0.64 | 0.29 – 1.06 |
| Phosphorous, max | 0.025 | 0.025 | 0.025 |
| Sulfur, max | 0.025 | 0.025 | 0.025 |
| Silicon | 0.18 -0.37 | 0.10 min | |
| Nickel | 3.18 – 3.82 |
For each reduction of 0.01% carbon below 0.30%, an increase of 0.05% manganese above 1.06% would be permitted to a maximum of 1.35% manganese. When Grade 6 is ordered under this specification, supplying an alloy grade that specifically requires the addition of any element other than those listed for the ordered grade is not permitted. However, the addition of elements required for the deoxidation of the steel is permitted.
Tensile Requirements
The material shall conform to the requirements as proscribed:
| Grade 1 | Grade 3 | Grade 6 | |||||
| psi | MPa | psi | MPa | psi | MPa | ||
| Tensile Strength, min | 55,000 | 380 | 65,000 | 450 | 60,000 | 415 | |
| Yield Strength, min | 30,000 | 205 | 35,000 | 240 | 35,000 | 240 | |
| Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse | ||
| Elongation in 2 in. or 50 mm, (or 4D), min, %: | |||||||
| Basic minimum elongation for walls 5/16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section | 35 | 35 | 30 | 20 | 30 | 16.5 | |
| When the standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 28 | 20 | 22 | 14 | 22 | 12 | |
| For strip tests, a deduction for each 1/32in. [0.8 mm] decrease in wall thickness below 5/16 in. [8 mm] from the basic minimum elongation of the following percentage | 1.75 | 1.25 | 1.50 | 1.00 | 1.50 | 1.00 | |
| Elongation in 2 in. or 50 mm, min, %: |
| Wall Thickness | Grade 1 | Grade 3 | Grade 6 | ||||
| in. | mm | Longitudinal | Transverse | Longitudinal | Transverse | Longitudinal | Transverse |
| 5/16 (0.312) | 8 | 35 | 25 | 30 | 20 | 30 | 16 |
| 9/32 (.281) | 7.2 | 33 | 24 | 28 | 19 | 28 | 15 |
| 1/4 (.250) | 6.4 | 32 | 23 | 27 | 18 | 27 | 15 |
| 7/32 (.219) | 5.6 | 30 | 26 | 26 | |||
| 3/16 (.188) | 4.8 | 28 | 24 | 24 | |||
| 5/32 (.156) | 4 | 26 | 22 | 22 | |||
| 1/8 (.125) | 3.2 | 25 | 21 | 21 | |||
| 3/32 (.094) | 2.4 | 23 | 20 | 20 | |||
| 1/16 (.063) | 1.6 | 21 | 18 | 18 |
Impact Requirements
For Grades 1, 3 and 6, the notched-bar impact properties of each set of three impact specimens, including specimens for the welded joint in welded pipe with wall thicknesses of 0.120 in. [3 mm] and larger, shall not be less than the values prescribed:
| Size of Specimen, min | Minimum Average Notched Bar Impact Value of Each Set of Three Specimens | Minimum Notched Bar Impact Value of One Specimen Only of a Set | Impact Temperature | |||||
| ft-lbf | J | ft-lbf | J | Grade | Min Impact Test Temp | |||
| 10 by 10 | 13 | 18 | 10 | 14 | F | C | ||
| 10 by 7.5 | 10 | 14 | 8 | 11 | 1 | -50 | -45 | |
| 10 by 6.67 | 9 | 12 | 7 | 9 | 3 | -150 | -100 | |
| 10 by 5 | 7 | 9 | 5 | 7 | 6 | -50 | -45 | |
| 10 by 3.33 | 5 | 7 | 3 | 4 | ||||
| 10 by 2.5 | 4 | 5 | 3 | 4 |
| APPROVED VENDERS MAKE & ORIGIN | |||
| ARAMCO | ADMA-OPCO | ADPC | IPC |
| GASCO | ADMA | SAIPEM | PDO |
| TOTAL | OIEC | IOOC | NIOC |
| KOC | ZADCO | ADNOC | SABIC |
| KNPC | BP | EIL | IOCL |
People Also search for A333 Gr. 6 Pipes
Aditya Steel Engg. co. is Manufacturers, stockist, suppliers and exporters of ASME SA 333 Large-Diameter Carbon Steel Gr 6 Pipe, Grade 6 Carbon Steel Custom Pipe Dealer, Grade 6 Carbon Steel Thin Wall Pipe, Grade 6 Carbon Steel Thick Wall Pipe, Carbon Steel a333 Grade 6 Seamless Pipes Wholesaler, Carbon Steel a333 Gr 6 Pipes Stockist, Buy Carbon Steel a333 Grade 6 Seamless Pipes, Carbon A333 Gr 6 Rectangular Pipe, Carbon A333 Gr 6 Pipes Supplier in Mumbai, India. ASTM A333 6 Carbon Steel Rectangular Pipes Trader, Ready Stock of Carbon 6 Seamless Pipes, Competitive Price of Carbon Steel A333 6 Seamless Pipe, ASTM A333 Carbon 6 Round Pipes, Largest Stockholder of Carbon Steel 6 Seamless Pipes in India, ASTM A333 Carbon Steel 6 Seamless Pipes Manufacturers in Mumbai, India.
Suppliers of A333 Gr.3 CS Electropolish ERW Pipes in Dubai, Middle east, uae, Suppliers of ASTM A333 Gr.3 Carbon Hexagonal Pipe in Dubai, Middle east, uae, Suppliers of A333 Gr.3 Seamless Carbon Hollow Pipe in Dubai, Middle east, uae, exporters of ASTM A333 Gr.3 Bush Hex pipe in Dubai, Middle east, uae, exporters of Carbon A333 Gr.3 Seamless pipe in Dubai, Middle east, uae, ASTM A333 Seamless Pipes in Dubai, Middle east, uae, exporters of ASTM CS Gr.6 Seamless Pipe in Dubai, Middle east, uae, exporters of Grade 6 A333 Seamless Pipe in Dubai, Middle east, uae, exporters of ASTM A333 Carbon Seamless Pipes in Dubai, Middle east, uae, exporters of ASTM A333 Gr.6 CS Pipe in Dubai,
Aditya Steel Engg. co. Manufacturer, Stock, Supply and export to :
India, Saudi Arabia, Bangladesh, United States, UAE, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico,Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile , Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria,Croatia, Czech Republic, Estonia, Finland,Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad, Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia