In addition to having significant experience and expertise in manufacturers of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service BUTT-WELD FITTINGS.
We at Aditya Steel Engineering Co. are a group of innovative and committed manufacturers and exporters of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service ASTM A420 Gr WPL6 Butt-Weld Fittings in India, LTCS A420 WPL6 Buttweld Fittings suppliers in Mumbai, Stockist of LTCS A420 WPL6 Weld Fittings & Exporters of ASTM A420 Gr.WPL6 Smls Fittings in India.
Production of ASTM A420 WPL6 Fittings
Aditya Steel Engineering Co. has a substantial creative manufacturers that values developing work of the highest quality. In Vasai, India, we develop and produce Wrought Carbon Steel and Alloy Steel for Low-Temperature Service ASTM A420 WPL6 Butt Weld Pipe Fittings. Butt Weld Pipe Fittings of Carbon Steel ASTM A420 WPL6 Butt Weld Pipe Fittings including 30, 45, 90, 180 Degree elbow / Bend, Concentric Reducer, Eccentric Reducer, Equal Tee, Unequal / Reducing Tee, Cap, Stub End in Vasai, Mumbai, Maharashtra, India are our main focus.
Aditya Steel Engineering Co. is a rapid and talented engineering group that manufactures Low Temp. Carbon Steel A420 WPL6 Butt Weld Pipe Fittings in India and Asia. Our team possesses a distinct set of capabilities in engineering, technology, and production. We are continually expanding our expertise and skill in order to make Low Temp. Carbon Steel A420 WPL6 Butt Weld Pipe Fittings that are of high quality and delivered on time. We also met the challenge of bringing this enthusiasm to life in the oil and gas pipe industry.
We are a group of creative, devoted, and enthusiastic Manufacturers at Aditya Steel Engineering Co., and we are dedicated to growing Manufacturers., Suppliers, and stockists of LTCS A420 WPL6 Weld Fittings, ASTM A420 WPL6 Material, LTCS A420 BUTTWELD FITTING, LOW TEMPERATURE A420 WPL6 BUTTWELD PIPE FITTINGS EXPORTER, ASTM A420 WPL6 LTCS BUTTWELD FITTINGS, WPL6 LOW TEMPERATURE CARBON STEEL PIPE CAP, LTCS GRADE WPL6 PIPE ELBOW SUPPLIER in Mumbai, India
Aditya Steel Engineering Co. is acknowledged for being an internationally recognized leader in engineering, manufacturing, and and stocckist of ASTM A420 WPL6 Elbow, in Mumbai, Manufacturers of A420 WPL6 CAP in India, Manufacturers of A420 WPL6 Eccentric Reducer in Japan, Manufacturers of A420 WPL6 concentric Reducer in Korea, Manufacturers of A420 WPL6 Equal Tee in Europe, Manufacturers of A420 WPL6 Unequal Tee in Dubai, Middle east, Manufacturers of A420 WPL6 long weld Stub End in UAE, Manufacturers of A420 WPL6 Short weld Stub End in Thane.
The Most Renowned Steel Manufacturing Sectors That Focus On Providing A Comprehensive Range Of ASTM A420 WPL6 Buttweld Pipe Fittings, Which Is Widely Used In Industrial Applications And Can Face Continuous Service Down Upto -46 Degree F. LTCS A420 Gr Wpl6 Buttweld Concentric Reducers And LTCS Pipe Fittings Is Largely Used In Industries Of Shipbuilding, Offshore, Water System, Oil Field, Natural Gas Electric Power And Pipe Projects.
Carbon Steel Astm A420 WPl6 Pipe Fittings are Resistance To Corrosion. LTCS A420 WPl6 Buttweld Concentric Reducers Residues Ductile and Soft Even In Loe Temperature. Low Temperature Carbon Steels Will Be Non-Hardening In Nature Which Assist It To Intercept Cracking When The Alloy Is Reveal1ed To High Temperature Or Welded. WPL6 Weld Fittings are available in two types seamless size range from 1/2 inch – 10 inch and in welded size range from 1/2 inch – 48 inch and thicknesses SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS. Low Temperature Carbon Steel Fittings Has Superlative Resistance To Pitting, General Corrosion And Crevice Corrosion In Chemicals Containing Chlorides, Sulphuric, Phosphoric, And Nitric Acids.
We are Supplier and exporter of ASTM A420 Gr WPL6 Pipe Fittings Such As A420 WPL6 Carbon Steel Tee, A420 WPL6 Carbon Steel Cross, WPL6 Carbon End Pipe Cap, Carbon Steel A420 WPL6 Elbow, Carbon Steel WPL6 Stub Ends, ASTM A420 WPL6 CS Reducer to countries like Finland, Netherlands, Malaysia, China, Canada, Zimbabwe, Italy, Sweden, Philippines, Germany, France, South Africa, UK. Buy ASTM A420 WPL6 Fittings, ASTM A420 Gr WPL6 Caps, ASTM Grade A420 WPL6 Bends, SA420 WPL6 45º Elbows, Low Temperature A420 Gr. WPL6 end cap, A420 WPL6 Nipples, LTCS A420 WPL6 90º Elbows, LTCS WPL6 Cross, Low Temperature Carbon Steel WPL6 reducer at best price in cities like Ahmedabad, Delhi, Mumbai, Ludhiana, Chennai, Ghaziabad, Rajkot, Bangalore, Bhosari, Vadodara, Pune.
Low Temperature Carbon Steel Fittings Types.
- Manufacturers of ASTM A420 WPL6 Elbow
- Manufacturers of A420 WPL6 CAP
- Manufacturers of A420 WPL6 Eccentric Reducer
- Manufacturers of A420 WPL6 concentric Reducer
- Manufacturers of A420 WPL6 Equal Tee
- Manufacturers of A420 WPL6 Unequal Tee
- Manufacturers of A420 WPL6 long weld Stub End
- Manufacturers of A420 WPL6 Short weld Stub End
Exporters of Low Temperature Carbon Steel Fittings, WPL6 weld fittings Manufacturers LTCS Pipe Fittings in Mumbai and ASTM A420 WPL6 Pipe Fittings Suppliers in India.
Suppliers of Low Temperature Carbon Steel Fittings in Dubai, Middle East
| Manufacturers of LTCS ASTM A420 WPL6 Cross Tee in Jebel Ali UAE |
| Suppliers of Low Temperature WPL6 Lap Joint Stub Ends in India |
| Exporters of LTCS ASTM A420 WPL6 Return Bends in Sharjah, UAE |
| Stockists of Low Temperature WPL6 Pipe Elbows in Oman |
| A420 Gr. WPL6 Equal Tee Stockist in Dubai, Middle East |
| Low Temperature Steel Cross fitting Stockist in Dubai, Middle East |
| A420 Gr. WPL6 Stub Ends Stockist in Dubai, Middle East |
| Low Temperature Steel Reducing Tee Stockist in Dubai, Middle East |
| A420 WPL6 Pipe Reducer Stockist in Dubai, Middle East |
| ASTM A420 Grade WPL6 Eccentric Reducer Stockist in Dubai, Middle East |
| A420 WPL6 Weld Eccentric Reducer Stockist in Dubai, Middle East |
| ASTM A420 Grade WPL6 End Cap Stockist in Dubai, Middle East |
| ASTM A420 WPL6 Weld Elbows Stockist in Dubai, Middle East |
| ASTM A420 Gr WPL6 90 Degree Elbows Stockist in Dubai, Middle East |
| ASTM A420 WPL6 Laterals Stockist in Dubai, Middle East |
| ASTM A420 Gr WPL6 Concentric Reducer Stockist in Dubai, Middle East |
| A420 WPL6 Equivalent Grade Stockist in Dubai, Middle East |
| A420 WPL6 Chemical Composition Stockist in Dubai, Middle East |
| ASTM A420 WPL6 welded Equal Tee Stockist in Dubai, Middle East |
| ASTM A420 WPL6 Temperature Stockist in Dubai, Middle East |
1. Chemical Composition of ASTM A420 WPL6
| C | Mn | P | S | Si | Ni | Cr | Mo | Cu | Cb | V |
|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.30 | 0.50~1.05 | ≤0.035 | ≤0.040 | 0.15~0.40 | ≤0.40 | ≤0.30 | ≤0.12 | ≤0.40 | ≤0.02 | ≤0.08 |
*All values are in % unit.
2. Mechanical Properties of ASTM A420 WPL6
| Tensile Strength, min. | Yield Strength, min. | Elongation (2 in.), min. | |||
|---|---|---|---|---|---|
| ksi | MPa | ksi | MPa | Longitudinal, % | Transverse, % |
| 60~95 | 415~655 | 35 | 240 | 30 | 16.5 |
*All properties shall be measured at room temperature.
3. Charpy Impact Requirements
| Size of Specimen | A* | B* | ||
|---|---|---|---|---|
| mm | ft·lbf | J | ft·lbf | J |
| 10 by 10.0 | 13 | 17.6 | 10 | 13.6 |
| 10 by 7.5 | 10 | 13.6 | 8 | 10.8 |
| 10 by 5.0 | 7 | 9.5 | 5 | 7.0 |
| 10 by 2.5 | 4 | 5.4 | 3 | 4.1 |
*A – Charpy V-Notch Impact Value Required for Acceptance (Average of Three Specimens).
*B – Minimum Charpy V-Notch Impact Value Without Requiring Retest (One Specimen Only of a Set).
*The impact test temperature shall be -50°F[-45°C] for ASTM A420 Gr. WPL6.
4. Maximum Allowable Stress at Elevated Temperatures
| Temp. | -20~100 | 150 | 200 | 300 | 400 | 500 |
| *MAS | 17.1 | 17.1 | 17.1 | 17.1 | 17.1 | 17.1 |
| Temp. | 600 | 650 | 700 | 750 | 800 | 850 |
| *MAS | 17.1 | 17.1 | 15.6 | 13.0 | 10.8 | 8.7 |
*Temp.: metal temperature, °F, not exceeding. *MAS: maximum allowable stress, ksi.
5. Design Stress Intensity at Elevated Temperatures
| *Temp. | -20~100 | 150 | 200 | 300 | 400 | 500 | 600 | 650 | 700 |
|---|---|---|---|---|---|---|---|---|---|
| *DSI | 20.0 | 20.0 | 20.0 | 20.0 | 19.9 | 19.0 | 17.9 | 17.3 | 16.8 |
*Temp.: metal temperature, °F, not exceeding. *DSI: design stress intensity of A420 Gr. WPL6, ksi.
6. Tensile Strength at Elevated Temperatures
| *Temp. | -20~100 | 200 | 300 | 400 | 500 | 600 | 650 |
| *TS | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 | 60.0 |
| *Temp. | 700 | 750 | 800 | 850 | 900 | 950 | 1000 |
| *TS | 60.0 | 59.3 | 55.1 | 50.2 | 44.8 | 39.4 | 34.6 |
*Temp.: metal temperature, °F, not exceeding. *TS: tensile strength of ASTM A420 WPL6, ksi.
7. Yield Strength at Elevated Temperatures
| *Temp. | -20~100 | 150 | 200 | 250 | 300 | 400 | 500 | 600 |
| *YS | 35.0 | 32.9 | 32.1 | 31.5 | 31.0 | 22.9 | 28.5 | 26.8 |
| *Temp. | 650 | 700 | 750 | 800 | 850 | 900 | 950 | 1000 |
| *YS | 25.9 | 25.1 | 24.2 | 23.5 | 22.8 | 22.1 | 21.5 | 20.8 |
*Temp.: metal temperature, °F, not exceeding. *YS: yield strength of ASTM A420 WPL6, ksi.
Low Temperature Carbon Steel ASTM A420 WPL6 Buttweld Fittings
| Manufacturers of LTCS ASTM A420 WPL6 Cross Tee | Manufacturers of A420 WPL6 Pipe Reducer |
| Manufacturers of LTCS ASTM A420 WPL6 Cross Tee | Manufacturers of A420 WPL6 Pipe Reducer |
| Manufacturers of Low Temperature WPL6 Lap Joint Stub Ends | Manufacturers of ASTM A420 Grade WPL6 Eccentric Reducer |
| Manufacturers of Low Temperature WPL6 Lap Joint Stub Ends | Manufacturers of ASTM A420 Grade WPL6 Eccentric Reducer |
| Manufacturers of LTCS ASTM A420 WPL6 Return Bends | Manufacturers of A420 WPL6 Weld Eccentric Reducer |
| Manufacturers of LTCS ASTM A420 WPL6 Return Bends | Manufacturers of A420 WPL6 Weld Eccentric Reducer |
| Manufacturers of Low Temperature WPL6 Pipe Elbows | Manufacturers of ASTM A420 Grade WPL6 End Cap |
| Manufacturers of Low Temperature WPL6 Pipe Elbows | Manufacturers of ASTM A420 Grade WPL6 End Cap |
| Manufacturers ofA420 Gr. WPL6 Equal Tee in Thane | Manufacturers of ASTM A420 WPL6 Weld Elbows |
| Manufacturers ofA420 Gr. WPL6 Equal Tee in Mumabi | Manufacturers of ASTM A420 WPL6 Weld Elbows |
| Manufacturers ofLow Temperature Steel cross fitting | Manufacturers of ASTM A420 Gr WPL6 90 Degree Elbows |
| Manufacturers of Low Temperature Steel Cross fitting in Singapore | Manufacturers of ASTM A420 Gr WPL6 90 Degree Elbows |
| Manufacturers of A420 Gr. WPL6 Stub Ends in Korea | Manufacturers of ASTM A420 WPL6 Laterals in Saudi Arabia |
| Manufacturers of A420 Gr. WPL6 Stub Ends in europe | Manufacturers of ASTM A420 WPL6 Laterals in India |
| Manufacturers of Low Temperature Steel Reducing Tee in Germany | Manufacturers of ASTM A420 Gr WPL6 Concentric Reducer in Poland |
| Manufacturers of Low Temperature Steel Reducing Tee | Manufacturers of ASTM A420 Gr WPL6 Concentric Reducer |
ASTM A420 WPL6 Buttweld Fittings manufacturer in Mumbai, India
Manufacturers of LTCS ASTM A420 WPL6 Cross Tee in India
Suppliers of Low Temperature WPL6 Lap Joint Stub Ends in India
Exporters of LTCS ASTM A420 WPL6 Return Bends in India
Stockists of Low Temperature WPL6 Pipe Elbows in India
A420 Gr. WPL6 Equal Tee Manufacturer in Mumbai, India
Low Temperature Steel Cross fitting Manufacturer in Mumbai, India
A420 Gr. WPL6 Stub Ends Manufacturer in Mumbai, India
Low Temperature Steel Reducing Tee Manufacturer in Mumbai, India
A420 WPL6 Pipe Reducer Manufacturer in Mumbai, India
ASTM A420 Grade WPL6 Eccentric Reducer Manufacturer in Mumbai, India
A420 WPL6 Weld Eccentric Reducer Manufacturer in Mumbai, India
ASTM A420 Grade WPL6 End Cap Manufacturer in Mumbai, India
ASTM A420 WPL6 Weld Elbows Manufacturer in Mumbai, India
ASTM A420 Gr WPL6 90 Degree Elbows Manufacturer in Mumbai, India
ASTM A420 WPL6 Laterals Manufacturer in Mumbai, India
ASTM A420 Gr WPL6 Concentric Reducer Manufacturer in Mumbai, India
A420 WPL6 Equivalent Grade Manufacturer in Mumbai, India
A420 WPL6 Chemical Composition Manufacturer in Mumbai, India
ASTM A420 WPL6 Mechanical Properties Manufacturer in Mumbai, India
ASTM A420 WPL6 Temperature Manufacturer in Mumbai, India
Aditya Steel Engg. co. Manufacturer, Stock, Supply and export LTCS A420 WPL6 Buttwled fittings to :
India, Saudi Arabia, Bangladesh, United States, UAE, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico,Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile , Venezuela, Ecuador, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria,Croatia, Czech Republic, Estonia, Finland,Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad, Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia